WC installation system and bidet faucet
Installation information
The installation height of the WC-Seat should be 40 cm
Water quantities
Operation of the bidet fitting with low-pressure displacement water
heaters is not possible for the bidet fitting!
Requirements to ensure good functioning of this shower
solution:
• Min. 0.5 bar flow pressure
• recommended flow pressure 1-5 bar
• Max. 10 bar operating pressure
• Test pressure 16 bar
If static pressure is greater than 5 bar, fit pressure
reducer.
Avoid major pressure differences between cold and hot water
supply.
• Flow rate at 3 bar flow pressure: approx. 10 l/min
• Hot water inlet max. 80°C
• Recommended: (energy saving) 60°C
General tips for installation
Please make sure that the water volume and the water pressure is
adequate so as the waste is sufficiently be dimensioned.