Concealed thermostat with bath filler
Comfortable - the GROHE Aquadimmer is an operating lever that
allows choosing between the wall spout or hand shower and controls
the flow rate at the same time.
Safety – Temperature Adjustment prevents scalding especially around
By varying the installation height of the hand shower holder, you
influence how far the shower hoses reaches into the bathtub.
To prevent drinking water from being sucked back into the pipe
network (see EN 1717), an approved safety device must be fitted
when installing a hand shower in combination with a bathtub. Such a
device is available in the GROHE accessories range – product number
29 007 000.
To ensure good functioning of this bath solution, a minimum of 7 l
of hot/cold water are required per minute at a dynamic supply
pressure of at least 1 bar ahead of the thermostat fitting. For
faster filling of the bathtub, a higher flow rate is
General tips for installation
Please make sure that the water volume and the water pressure is
adequate so as the waste is sufficiently be dimensioned.