Concealed thermostat with inlet system
Comfortable - the GROHE Aquadimmer is an operating lever that
allows choosing between the Talentofill filling valve and hand
shower and controls the flow rate at the same time.
Safe – for people with children, we recommend the use of a
thermostat fitting, which ensures a constant water temperature to
provide protection against scalding.
By varying the installation height of the hand shower holder, you
influence how far the shower hoses reaches into the bathtub.
To prevent drinking water from being sucked back into the pipe
network (see EN 1717), an approved safety device must be fitted
when installing a hand shower or a Talentofill filling valve in
combination with a bathtub.
Such a device is available in the GROHE accessories range – product
number 29 007 000.
To ensure good functioning of this bath solution, a minimum of 7 l
of hot/cold water are required per minute at a dynamic supply
pressure of at least 1 bar ahead of the thermostat fitting. For
faster filling of the bathtub, a higher flow rate is
General tips for installation
Please make sure that the water volume and the water pressure is
adequate so as the waste is sufficiently be dimensioned.