Utanpåliggande badkarsblandare
Product recommendations
Practical information
Comfortable - the ceramic cartridge with GROHE SilkMove® technology guarantees the smoothest handling within an extra generous operating angle of the lever that creates effortless precision and ensures a lifetime of maintenance-free comfort.
Practical – the diverter is used to switch between the hand shower and the bath filler.
To avoid surprises, the diverter automatically switches to the bath filler when the water is turned off.
Safe – Temperature Adjustment: An optional Temperature limiter prevents scalding especially around children.
Installation information
By varying the installation height of the hand shower holder, you influence how far the shower hoses reaches into the bathtub.
To prevent drinking water from being sucked back into the pipe network (see EN 1717), an approved safety device must be fitted when installing a hand shower in combination with a bathtub. Such a device is available in the GROHE accessories range – product number 29 007 000.
Water quantities
To ensure good functioning of this bath solution, a minimum of 7 l of hot/cold water are required per minute at a dynamic supply pressure of at least 1 bar ahead of the fitting. For faster filling of the bathtub, a higher flow rate is recommended.
General tips for installation
Please make sure that the water volume and the water pressure is adequate so as the waste is sufficiently be dimensioned.
Comfortable - the ceramic cartridge with GROHE SilkMove® technology guarantees the smoothest handling within an extra generous operating angle of the lever that creates effortless precision and ensures a lifetime of maintenance-free comfort.
Practical – the diverter is used to switch between the hand shower and the bath filler.
To avoid surprises, the diverter automatically switches to the bath filler when the water is turned off.
Safe – Temperature Adjustment: An optional Temperature limiter prevents scalding especially around children.
Installation information
By varying the installation height of the hand shower holder, you influence how far the shower hoses reaches into the bathtub.
To prevent drinking water from being sucked back into the pipe network (see EN 1717), an approved safety device must be fitted when installing a hand shower in combination with a bathtub. Such a device is available in the GROHE accessories range – product number 29 007 000.
Water quantities
To ensure good functioning of this bath solution, a minimum of 7 l of hot/cold water are required per minute at a dynamic supply pressure of at least 1 bar ahead of the fitting. For faster filling of the bathtub, a higher flow rate is recommended.
General tips for installation
Please make sure that the water volume and the water pressure is adequate so as the waste is sufficiently be dimensioned.