WC installation system and bidet faucet

Product recommendations

Installation information

The installation height of the WC-Seat should be 40 cm

Water quantities

Operation of the bidet fitting with low-pressure displacement water heaters is not possible for the bidet fitting!

Requirements to ensure good functioning of this shower solution:
• Min. 0.5 bar flow pressure
• recommended flow pressure 1-5 bar
• Max. 10 bar operating pressure
• Test pressure 16 bar

If static pressure is greater than 5 bar, fit pressure reducer.

Avoid major pressure differences between cold and hot water supply.
• Flow rate at 3 bar flow pressure: approx. 10 l/min
• Hot water inlet max. 80°C
• Recommended: (energy saving) 60°C

General tips for installation
Please make sure that the water volume and the water pressure is adequate so as the waste is sufficiently be dimensioned.