Rapido T Installation

9 easy steps to install universal concealed valves GROHE Rapido.

  1. Mount the pipe couplings
  2. Line out the concealed valve - Mark drill holes - Drill the holes and mount the box
  3. Connect the pipes and isolate them - Check the connections - Flush the pipes
  4. Fill the space in the wall - Use the marker for the correct installation depth
  5. Cover the wall with tile adhesive - Place the collar and cover it also with tile adhesive
  6. Fit the tiles on the wall
  7. Remove the cap - Cut the shaft off
  8. Mount the Aqua Dimmer head part
  9. Mount the trim set